Lexus NX 200t User Manual

275
4-5. Using the driving support systems
4
Driving
NX200t_OM_USA_OM78145U
You can change the buzzer sounds volume and the screen operating conditions
when the engine switch is in IGNITION ON mode.
 Lexus Display Audio system
Press the “MENU” button on the Lexus Display Audio controller, and then
select “Setup” on the screen.
Select “Vehicle”, and then select “LEXUS Park Assist” on the screen.
Select the desired item.
 Navigation system
Press the “MENU” button on the Remote Touch, and then select “Setup” on
the screen.
Select “Vehicle”, and then select “LEXUS Park Assist” on the screen.
Select the desired item.
The buzzer sounds volume can be adjusted.
On or off can be selected for intuitive parking assist display.
Both the front or rear center sensors display and tone indication can be set.
Setting up intuitive parking assist (vehicles with a Lexus Display Audio
or navigation system)
1
2
3
1
2
3
 Lexus Display Audio screen  Navigation system screen
1
2
3

Lexus NX 200t Specifications

General

Brand	Lexus
Model	NX 200t
Category	Automobile
Language	English