495
7-1. Maintenance and care
7
Maintenance and care
NX200t_OM_USA_OM78145U
■ High pressure car washes
● Do not allow the nozzles of the car wash to come within close proximity of the windows.
● Before using the car wash, check that the fuel filler door on your vehicle is closed prop-
erly.
■ Note for a smart access system with push-button start
● If the door handle becomes wet while the electronic key is within the effective range,
the door may lock and unlock repeatedly. Place the key in a position 6 ft. (2 m) or more
separate from the vehicle while the vehicle is being washed. (Take care to ensure that
the key is not stolen.)
● If the electronic key is inside the vehicle and a door handle becomes wet during a car
wash, a buzzer will sound outside the vehicle. To turn off the alarm, lock all the doors.
● Set the electronic key to battery-saving mode to disable the smart access system with
push-button start. (→P. 132)
■ Aluminum wheels
● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or
abrasive cleaners. Do not use strong or harsh chemical cleaners.
Use the same mild detergent and wax as used on the paint.
● Do not use detergent on the wheels when they are hot, for example after driving for
long distance in the hot weather.
● Wash detergent from the wheels immediately after use.
■ Bumpers
Do not scrub with abrasive cleaners.
■ Front side windows water-repellent coating (vehicles with water-repellent coating)
● The following precautions can extend the effectiveness of the water-repellent coating.
• Remove any dirt, etc. from the front side windows regularly.
• Do not allow dirt and dust to accumulate on the windows for a long period.
Clean the windows with a soft, damp cloth as soon as possible.
• Do not use wax or glass cleaners that contain abrasives when cleaning the windows.
• Do not use any metallic objects to remove condensation build up.
● When the water-repellent performance has become insufficient, the coating can be
repaired. Contact your Lexus dealer.