Lexus NX 200t User Manual

559
7-3. Do-it-yourself maintenance
7
Maintenance and care
NX200t_OM_USA_OM78145U
■ Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by your Lexus
dealer.
● Headlight low beams
● Headlight high beams (LED type)
● Front turn signal lights (LED type)
● Parking lights and Daytime running lights
● Front fog lights
● Cornering lights (if equipped)
● Front side marker lights (LED type)
● Side turn signal lights
● Stop/tail lights
● Rear side marker lights
● High mounted stoplight
● License plate lights
● Outer foot lights
■ After replacing the bulbs
■ LED lights
The headlight low beams, headlight high beams (LED Type), front turn signal lights (LED
Type), parking lights, daytime running lights, front fog lights, cornering lights (if
equipped), front side marker lights (LED Type), side turn signal lights, rear side marker
lights, stop/tail lights, rear side marker lights, high mounted stoplight and license plate
lights, outer foot lights consist of a number of LEDs. If any of the LEDs burn out, take your
vehicle to your Lexus dealer to have the light replaced.
■ Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not indicate a
malfunction. Contact your Lexus dealer for more information in the following situations:
● Large drops of water have built up on the inside of the lens.
● Water has built up inside the headlight.
■ When replacing light bulbs
→P. 544
After removing the engine compartment cover,
return the cover to original position with the
clips.
Insert
Press
1
2

Lexus NX 200t Specifications

General

Brand	Lexus
Model	NX 200t
Category	Automobile
Language	English