645
9-2. Customization
9
Vehicle specifications
NX200t_OM_USA_OM78145U
■ Vehicle customization
● When the speed linked door locking function and shift position linked door locking
function are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all the doors will be locked.
• If the vehicle is started with all the doors locked, the speed linked door locking func-
tion would not operate.
• If the vehicle is started with any door unlocked, the speed linked door locking func-
tion will operate.
● When the smart access system with push-button start is off, smart door unlocking can-
not be customized.
● When the doors remain closed after unlocking the doors and the automatic door lock
function is activated, the signals will be generated in accordance with the Operation
signal (buzzer) and the Operation signal (emergency flashers) settings.
■ In the following situations, customize mode in which the settings can be changed
through the multi-information display will automatically be turned off.
● A warning message appears after the customize mode screen is displayed.
● The engine switch is turned off.
● The vehicle begins to move while the customize mode screen is displayed.
■ Cautions during customization
As the engine needs to be running during customization, ensure that the vehicle is
parked in a place with adequate ventilation. In a closed area such as a garage, exhaust
gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This
may lead to death or a serious health hazard.
■ During customization
To prevent battery discharge, ensure that the engine is running while customizing fea-
tures.
To Next Page
Loading...
Need help?
General
