Turning on the high beam headlights
1 With the headlights on, push the lever for-
ward.
The high beam headlights will turn on.
Pull the lever to its original position to turn the
high beam headlights off.
2 Pull the lever rearward and release it.
The high beams will flash once.
The high beam headlights can be illuminated
this way even with the headlights off.
Operation of the cornering lights
When any of the following conditions are met, while the headlights (low beam)
are on, the cornering lights will turn on and light up the direction of movement of
the vehicle. The cornering lights are designed to ensure excellent visibility when
turning at intersections or parking at night.
●
The steering wheel is being operated
● The turn signal lever is being operated
● The shift position is in R
INFORMATION
■ Cornering light control
● When vehicle speed is approximately 22 mph (35 km/h) or higher, the cornering
lights will not turn on.
● The lights will automatically turn off if they remain illuminated for 30 minutes.
Operation of the AFS (Adaptive Front-lighting System)
*
The AFS (Adaptive Front-lighting System) ensures excellent visibility when turn-
ing at intersections and on curves by automatically adjusting the angle of the
headlights according to vehicle speed and the angle of the tires as controlled by
steering input.
The AFS operates at speeds of 6 mph (11 km/h) or higher.
* :
If equipped
3-1. Driving when the surrounding area is dark
199
3
Driving according to the conditions
To Next Page
Loading...
