● Oil quantity (Low → Full)
1.6 qt. (1.5 L, 1.3 Imp.qt.)
● Items
Clean funnel
Related Links
Lubrication system (NX350)(P. 679)
Lubrication system (NX250)(P. 680)
Adding engine oil
If the oil level is below or near the low level mark, add engine oil of the same type as
that already in the engine.
▶ NX250
▶ NX350
1 Remove the oil filler cap by turning it counterclockwise.
2 Add engine oil slowly, checking the dipstick.
3 Install the oil filler cap by turning it clockwise.
Checking the coolant
The coolant level is satisfactory if it is between the [FULL] and [LOW] lines on the
reservoir when the engine is cold.
8-4. Inspection of consumables
517
8
Maintenance and care
To Next Page
Loading...
