72
RZ450e_RZ300e_QG_U
4
Remove the charging connector cap
and secure it to the cable.
5
Insert the charging connector into the
AC charging inlet.
Align the guide position on the bottom
of the charging connector, and push
the charging connector straight into
the AC charging inlet as far as possible.
Once a click sound is heard, check that
the charging connector is securely
connected.
If the doors are locked, the charging
connector is locked.
If the charging connector is inserted
with the doors locked, the charging
connector is automatically locked.
6
Confirm that the charging indicator of
the charging port is illuminated.
Charging will not start if the charging
indicator does not illuminate when the
charging connector is inserted.
If the charging indicator is flashing, the
charging schedule is registered.
If the error warning indicator on the
CCID (Charging Circuit Interrupting
Device) flashes during charging, check
and follow the correction procedure.
The charging indicator will turn off
when charging is completed.
The charging indicator will also turn off
when charging is interrupted.
To Next Page
Loading...
