Need help?Do you have a question about the LEYBOLD IONIVAC ITR 90 and is the answer not in the manual?
General| Filament | Tungsten |
|---|---|
| Operating Temperature | 0 to 50°C |
| Protection Class | IP40 |
| Accuracy | ±15% of reading |
| Supply Voltage | 24 V DC ±10% |
| Output Signal | 0 to +10 V DC (linear) |
| Bakeout Temperature | 150 °C at the flange |
| Connector | 9-pin D-sub connector |
| Weight | 0.5 kg |
Covers measurement ranges, accuracy, output signals, and related parameters.
Details data rates, formats, and electrical connections for communication interfaces.
Guides on connecting the transmitter to the vacuum system and safety precautions.
Explains connecting the transmitter to controllers via analog and digital interfaces.
Step-by-step instructions for creating a flange connection for vacuum.
Procedures for safely disassembling and reassembling the electronics unit.
Covers Profibus operation, node address setting, and configuring switching functions.
Guides on identifying problems, checking sensor signals, and replacing the sensor.
To Next Page
