GA05141_0702 - 09/2004
14
Description
1.5 Standard specification
MAG
The turbomolecular pumps are shipped complete, sealed in a PE bag con-
taining a desiccant.
The maximum effective life time of the desiccant is one year.
The intake flange is sealed with a transport seal, the forevacuum flange with
a plastic cap.
For the intake flange, a centering ring with FPM O-ring, outer ring, and a
splinter guard are enclosed.
We also provide the bolts for attaching the pump to your tool. To avoid any
safety risk we highly recommend using only the bolts provided with the
pump. Refer also to Section 2.3 “Connecting the MAG ...”.
The electronic frequency converter MAG.DRIVE
digital
, the cables required
for operation and a seal kit to seal the pump tightly if it is removed from the
process must be ordered seperately.
MAG.DRIVE
digital
■ Converter
■ Line supply cable with USA connector, approx. 3m
■ Line supply cable with EURO connector, approx. 3 m
■ 2 spare fuses for the TMS (miniature fuses 5 x 20 mm, F4A; according
to IEC 127-2/1) and 2 fuse holders 6.3 x 30 mm
■ Connector for control plug X14 (pins 47/48 bridged)
To Next Page
Loading...
