Need help?Do you have a question about the LEYBOLD MAG W 2200 iP and is the answer not in the manual?
General| Brand | LEYBOLD |
|---|---|
| Model | MAG W 2200 iP |
| Category | Water Pump |
| Language | English |
Details hazards related to physical contact, pressure limits, and pump mounting.
Covers risks associated with electrical connections, voltage, and wiring.
Explains the turbomolecular pump's construction, rotor, magnetic bearing, and touch-down bearings.
Provides detailed specifications like pumping speed, throughput, and dimensions.
Lists technical data for the MAG.DRIVE iM frequency converter.
Specifies intended use and conditions for the turbomolecular pump.
Lists initial prohibited uses and conditions.
Lists further prohibited uses and conditions.
Instructions on mounting the pump, flange requirements, and crash momentum.
Details electrical connections, safety precautions, and circuit breaker requirements.
Step-by-step guide for powering on the backing pump and turbomolecular pump.
Procedures for safely shutting down the pump, including venting.
Explains causes and corrective actions for Red ERROR LED status.
Troubleshooting for pump start failures and unusual noises/vibrations.
Diagnosing and resolving problems with not reaching ultimate pressure.
To Next Page