LG 20LS7D - Page 25

EXTERNAL EQUIPMENT SETUP
23
When connecting with a RCA cable
GG
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
CAUTION
GG
The picture quality is improved: compared to normal
composite (RCA cable) input.
NOTE
!
VIDEO AUDIO
(MONO)
S-VIDEO
RS-232C IN
(SERVICE ONLY)
R
SERVICE
ONLY
HDMI/DVI IN
AV IN
H/P
ANTENN
VIDEO
COM
L R
S-VIDEO VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
VIDEO AUDIO
(MONO)
S-VIDEO
S-232C IN
VICE ONLY)
RGB (PC) IN
A
(
MI/DVI IN
AV IN
H/P
ANTENNA/CABLE IN
VIDEO
AUDIO
COMPONENT IN
L R
S-VIDEO
AUDIO
Connect the
AAUUDDIIOO
/
VVIIDDEEOO
jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
1. How to connect
2. How to use
■
Insert a video tape into the VCR and press PLAY on the
VCR.
(
Refer to the VCR owner’s manual.
)
■
Select
AAVV
input source by using the
IINNPPUUTT
button on the
remote control.
When connecting with an S-Video cable
Connect the S-VIDEO output of the VCR to the
SS --VVIIDDEEOO
input on the set.
Connect the audio outputs of the VCR to the
AAUUDDIIOO
input jacks on the set.
1. How to connect
2. How to use
■
Insert a video tape into the VCR and press PLAY on the VCR.
(
Refer to the VCR owner’s manual.
)
■
Select
AAVV
input source by using the
IINNPPUUTT
button on the
remote control.
1
2
1
GG
If you have a mono VCR, connect the audio cable from
the VCR to the
AAUUDDIIOO LL//MMOONNOO
jack of the set.
NOTE
!
1
1
2