Why is the screen color unstable on my LG 22XE1J-B.AEK?
If the screen color on your LG Digital Signage is unstable or mono-colored, check the connection status of the signal cable. You can also try re-inserting the PC graphics card.
How to fix horizontal noise or blurred characters on LG Digital Signage?
If you are experiencing horizontal noise or blurred characters on your LG Digital Signage: * For D-Sub analog signal, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
How to remove stripes appearing in the background of LG 22XE1J-B.AEK Digital Signage?
If stripes appear in the background of your LG Digital Signage: * For D-Sub analog signal, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
Why is touch applied to the wrong monitor on LG 22XE1J-B.AEK?
If touch input is being applied to a monitor other than the one you intended with your LG Digital Signage: * This may occur if the monitor is not set as the default monitor when you are using multiple monitors. Set the monitor as the default monitor. * This may also occur when the touch screen is not calibrated properly; change your tablet PC settings.
Why is the image not displayed on my LG 22XE1J-B.AEK?
If the image is not displayed on your LG Digital Signage, check that the cable is properly connected between the panel and the Signage box.
General| Panel Technology/Type | IPS |
|---|---|
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle (H x V) | 178° x 178° |
| VESA Mount | 100 x 100 mm |
| Operating Temperature | 0°C to 40°C |
| Display Size | 21.5 inches |
| Resolution | 1920 x 1080 |
| Response Time | 5 ms |
| Connectivity | HDMI, VGA |
| Color Gamut | 72% |
| Speaker | Yes |
To Next Page
