LG 27EA83R

21
ENG
ENGLISH
INSTALLING TRUE COLOR PRO/FINDER
6
Click [Install] to start the installation process.
7
When the installation is complete, restart the
system.
y
If an incompatible calibration application is
installed on your PC, a warring message ap-
pears asking you to remove the application
during the installation.
CAUTION
8
When you run the True Color Pro/Finder
software, the True Color Pro/Finder icon
[ ] appears in the system tray at the right
bottom of the PC screen.
Right-click the True Color Pro/Finder icon
and select "Start Program" to start the pro-
gram.
y
Once you have completed the monitor
calibration with the True Color Pro/Finder
software, remove the calibrator from the
monitor and store it at room temperature
away from direct sunlight or put it in the box.
- If the calibrator's measuring part is exposed
to direct sunlight for a long time, this may
cause damage to the calibrator.
- Do not store it in an environment with too
low/high temperature and high humidity.
y
If any third-party calibration application is
already installed on your PC, the image
quality may be affected by a conflict
between the two applications. For the best
performance, it is recommended to uninstall
the other calibration application.
CAUTION
y
To use the True Color Pro/Finder function,
you must purchase the supported calibrator.
y
For details on supported calibrators and
graphic cards, see the True Color Pro/Finder
user guide.
y
If you have changed the input port, it is
recommend that you calibrate the monitor's
picture quality again.
NOTE