Why is my LG 27HJ712C-W.ATR screen display unstable and shaky?
If your LG Monitor's screen display is unstable, shaky, or images leave shadow trails, and the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.
What to do if nothing is displayed on my LG Monitor screen?
If your LG Monitor screen is blank, ensure the power cord is properly connected to the outlet. Check the power cable connection and press the power button. Also, verify that the connected input source is enabled by going to Menu > Quick Settings > Input. If the monitor is in sleep mode, move the mouse or press any key. Confirm that your computer is turned on. If the issue persists and signals from the PC are out of range, refer to the Product Specification section of this manual to set the appropriate frequency. Finally, check the signal cable and reconnect it.
How to fix an LG Monitor when nothing is displayed on the screen?
If nothing is displayed on your LG monitor, try these steps: Ensure the power cord is correctly plugged into the outlet, check the power cable connection and press the power button. Also, verify that the connected input is enabled via Menu > Quick Settings > Input. If the monitor is in sleep mode, move the mouse or press a key. Confirm that your computer is turned on. If the signals from the PC are out of the monitor's frequency range, see the Product Specification section of this manual to set the appropriate frequency. Finally, check the cable and reconnect it.
How to fix no sound from headphone port or speaker on LG 27HJ712C-W.ATR?
First, try increasing the volume using the button on the monitor. If that doesn't work, set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the monitor as the default device.
How to get sound from the headphone port or speaker of my LG 27HJ712C-W.ATR Monitor?
If there's no sound from the headphone port or speaker of your LG Monitor, try increasing the volume using the button on the monitor. Also, set the audio output of the PC to the monitor you are using by going to Control Panel > Hardware and Sound > Sound on Microsoft Windows and set the monitor as the default device.
Why is nothing displayed on my LG 27HJ712C-W.ATR screen?
If nothing is displayed on your LG Monitor screen, try the following: Ensure the power cord is correctly plugged into the outlet, check the power cable connection, and press the power button. Also, verify that the connected input is enabled via Menu > Quick Settings > Input. If the monitor is in sleep mode, move the mouse or press a key. Confirm that your computer is turned on. If the signals from your PC are out of the monitor's frequency range, refer to the Product Specification section of this manual to set the appropriate frequency. Finally, check and reconnect the cable.
Why is there no sound from the headphone port or speaker on my LG Monitor?
If there is no sound from the headphone port or speaker on your LG Monitor, first try increasing the volume using the button on the monitor. Then, set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound, and set the monitor as the default device.
What to do if my LG 27HJ712C-W.ATR screen display is unstable and shaky?
If your LG Monitor's screen display is unstable and shaky, and the selected resolution is HDMI 1080i 60/50 Hz (interlaced), change the resolution to 1080p or the recommended resolution.
What to do if there is no sound from the headphone port or speaker of my LG 27HJ712C-W.ATR?
If there is no sound from the headphone port or speaker of your LG Monitor, try the following: * Increase the volume using the button on the monitor. * Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound > set the monitor as default device. (The settings may differ depending on the operating system you use.)
How to fix no sound from headphone port or speaker of LG 27HJ712C-W.ATR Monitor?
If there is no sound from the headphone port or speaker of your LG Monitor, first try increasing the volume using the button on the monitor. If that doesn't work, set the audio output of your PC to the monitor you are using. In Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the monitor as the default device.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178°/178° |
| Color Gamut | sRGB 99% |
| VESA Mount | 100 x 100 mm |
| Connectivity | HDMI, DisplayPort |
| Stand Adjustments | Tilt, Height |
To Next Page
