LG 27UD88 - Pbp

21
ENGLISH
Each option is described below.
-PBP
1
To view the OSD menu, press the joystick button at the bottom
of the monitor and then enter the Menu.
2
Go to PBP by moving the joystick.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
To return to the upper menu or set other menu items, move the
joystick to
◄
or pressing (
/ OK) it.
5
If you want to exit the OSD menu, move the joystick to
◄
until
you exit.
Quick Charge
Menu > PBP Description
Sub Displays the screens of two input modes on one monitor.
PBP Connection Sub Screen (Right)
HDMI 1 HDMI 2 DisplayPort USB-C
Main Screen
(Left)
HDMI 1 - - O O
HDMI 2 - - O O
DisplayPort O O - -
USB-C O O - -
Sound Out Changes the audio output in PBP mode.
Swap Toggles between the main screen and sub screen in PBP mode.
Sub Full Converts the sub screen of PBP mode to the wide screen.
Ratio Adjusts the aspect ratio of the main screen or sub screen.
Main Wide Displays the video to fit the PBP screen, regardless of the video signal input.
Original Displays the video in the aspect ratio of the video signal input on the PBP screen.
Sub Wide Displays the video to fit the PBP screen, regardless of the video signal input.
Original Displays the video in the aspect ratio of the video signal input on the PBP screen.
NOTE
y
When the Sub mode is Off, Sound Out, Swap, Sub Full, and Ratio menus become disabled.
The Main/Sub options for Ratio become disabled if there is no signal.
y
The optimal resolution for PBP mode is set automatically when PBP mode is set.