LG 32LC2D User Manual

INSTALLATION
13
STAND INSTALLATION (FOR 42PC1D*)
Image shown here may be slightly different from your set.
GG
WWhheenn cclloossiinngg tthhee ssttaanndd ffoorr ssttoorraaggee
■
First remove the screws in the holes (B) on the bottom of
the stand. And then pull two Hooks (D) of the stand bot-
tom and fold the stand into the back of the set.
■
After folding, push the two Locks (A) of the stand bot-
tom outward.
NOTE
!
(A)
(B)
(D)
(C)
Place the set with the screen facing
down on a cushion or soft cloth as
shown.
Before unfolding the stand, please make
sure two locks (A) on the bottom of the
stand push outward.
Pull the stand out as shown.
After unfolding the stand, please insert
and tighten the screws (provided as
parts of the product) in the holes (B) on
the bottom of the stand.
1
2
When connecting cables to the set, Do
not disengage the lock (C).
This may cause the set to fall, causing
serious bodily injury and serious damage
to the set.
3
(A)
(B)
9U0569A-1 Rev05 1/9/96 2:51 PM Page 13

LG 32LC2D Specifications