LG 42VX30MS - Page 75

75
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
04. Energy Saving (Command: j q)
Tocontroltheenergysavingfunction.
Transmission
[j][q][][SetID][][Data][Cr]
Data 00:Off
 01:Minimum
 02:Medium
 03.Maximum
 05.ScreenOff
Acknowledgement
[q][][SetID][][OK/NG][Data][x]
05. Picture Mode (Command: d x)
Toselectthepicturemode.
Transmission
[d][x][][SetID][][Data][x]
Data 00:Vivid
 01:Standard
 02.Cinema
 03.Sport
 04:Game
Acknowledgement
[x][][SetID][][OK/NG][Data][x]
06. Contrast (Command: k g)
Toadjustscreencontrast.
Transmission
[k][g][][SetID][][Data][Cr]
Data 00to64:Contrast0to100
Acknowledgement
[g][][SetID][][OK/NG][Data][x]
01. Power (Command: k a)
TocontrolpowerOn/Offthedisplay.
Transmission
[k][a][][SetID][][Data][Cr]
Data00:PowerOff
 01:PowerOn
 FF:Checkstatus
Acknowledgement
[a][][SetID][][OK/NG][Data][x]
*Inalikemanner,ifotherfunctionstransmit‘FF’
databasedonthisformat,Acknowledgementdata
feedbackpresentsstatusabouteachfunction.
*Note:Inthismodes,displaywillsendthe
acknowledgementafterpoweronprocessing
completion.Theremightbeatimedelaybetween
commandandacknowledgement.
*Theremightbesometimedelaysbetween
commandandacknowledgement.
02. Input Select (Command: x b)
Toselectinputsourcefordisplay.
Transmission
[x][b][][SetID][][Data][Cr]
Data 20:AV
 40:Component
 60:RGBPC
 70:DVI-D
 90:HDMI(DTV)
 A0:HDMI(PC)
 C0:DisplayPort(DTV)
 D0:DisplayPort(PC)
Acknowledgement
[b][][SetID][][OK/NG][Data][x]
03. Aspect Ratio (Command: k c)
Toadjustthescreenformat.
Transmission
[k][c][][SetID][][Data][Cr]
Data 01:4:3
 02:16:9
 04:Zoom
 09:Justscan(720pormore)
 10to1F:CinemaZoom1to16
Acknowledgement
[c][][SetID][][OK/NG][Data][x]