LG 60PCLD - Page 23

Installation
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if
you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure
as shown below.
m ®
L
HDMI-DTV OUTPUT
Digital Set-top Box
@ Connect the HDMI output of the digital set-top
box to the HDMI IN 1(DVl) or 2 jack on the set.
O Select HDMI1iDVI or HDMI2 input source with
using the INPUT button on the remote control
Turn on the digital set-top box. (Refer to the
owner's manual for the digital set-top box.)
TV can receive the video and audio signal simultaneously using a HDMI cable.
If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will
oe automatically setto 1280x720p.
If the digital set-top box does not support Auto HDMI, you need to set the output resolution appro-
priately. To get the best picture quality, adjust the output resolution of the digital set-top box to
1280x720p.
23