1.1 Power supply
External wiring procedure
- The power supply work is needed only to the outdoor unit. The power supply to the BD unit and the indoor unit is
conducted through the communication wiring. Therefore, the power supply work can be carried out at just one place of the
outdoor unit. It will simplify the work procedure and save cost.
- Wiring cable size must comply with the applicable local and national codes.
Type Outdoor unit
Capacity (kBtu/h)
Circuit breaker
capacity
Power supply Voltage range
1Phase
Inverter
AUUW24GD2 [LUU247HV] 24.0 30A
208/230V, 1Ø, 60Hz
MIN.:187
MAX.:253
AUUW42GD2 [LUU427HV] 42.0 40A
To Next Page
Loading...
Need help?
General
