Restores the detailed effect settings for the Standard sound mode to the initial settings.
This setting only applies to the internal speakers of the TV or HDMI (eARC/ARC)
connected devices that support Sound Mode Share.
Installation Type
Sound Advanced Settings Installation Type
This mode optimises the sound based on the TV setup.
Stand
Select this if the TV is installed in stand-type.
Wall-mounted
Select this if the TV is installed in wall-mounted type.
This setting is only available for Internal TV Speaker.
Automatic Volume Adjustment
Sound Advanced Settings Automatic Volume Adjustment
If it is set to On, the volume will be automatically adjusted to a suitable level for each
content you watch to help you enjoy watching more comfortably.
This setting only applies to the internal speakers of the TV or HDMI (eARC/ARC)
connected devices that support Sound Mode Share.
DTV Audio Setting
Sound Advanced Settings DTV Audio Setting
When different audio types exist in an input signal, this function allows you to select the
audio type you want.
If set to Auto the search order is AC4 → HE-AAC → Dolby Digital Plus → Dolby Digital
→ MPEG and output is produced in the first Audio Format found.
The following search order may change depending on the country : AC4 → HE-AAC →
Dolby Digital Plus → Dolby Digital → MPEG.
If the selected Audio Format is not supported, another Audio Format may be used for
output.
To Next Page
Loading...
Need help?
General
