Operating 15
Operating
3
Other Operations
Programmed Playback
The program function enables you to store your
favorite les from any disc or USB device.
A program can contain 20 tracks/les.
1. Insert a CD or a USB and wait for it to be
ordered.
2. Press PROGRAM on the remote control in stop
status.
3. Press
C/V
on the remote control or
Y/U
on the unit to select a track/file.
4. Press PROGRAM on the remote control again
to save and select a next track/file.
5. Press
d
/
M
on the remote control or
T
on the
unit to play the programmed music tracks/files.
6. To clear your selection, press
Z
on the remote
control or
I
on the unit twice.
The programs are also cleared when the disc
or USB device is removed, the unit is powered
o or the function is switched to others.
,
Note
Displaying file information
(ID3 TAG)
While playing an MP3 le containing le
information, you can display the information by
pressing DISPLAY.
Turn off the sound temporarily
Press
@
MUTE on the remote control to mute
your sound.
You can mute your sound, for example, to answer
the telephone, “MUTE” will appear and blink in the
display window.
To cancel it, press
@
MUTE again or change the
volume level.
Setting the BASS and TREBLE
You can listen to music with the bass and treble
eect by using the BASS and TREBLE.
Remote Control : Press BASS/TREBLE. Then “BASS/
TREB” is displayed. Press VOL+/- to select the sound
level you want.
Unit : Turn BASS/TREBLE right and left. Then “BASS/
TREB” is displayed.
On Display Description
BASS Reinforce bass sound eect.
TREB(TREBLE) Reinforce treble sound eect.
CM2030-DU_AESPLLB_ENG.indd 15 2013-06-19 3:08:57
To Next Page
Loading...
Need help?
General
