Operating 17
Operating
3
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press RDS
repeatedly to cycle through the various data
types. :
PS (Programme Service Name)
The name of the channel will appear in
the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing RDS. The display will show the last
PTY in use. Press PTY/ASPM one or more times to
select your preferred programme type. Press and
hold TUN. -/+. The tuner will search automatically.
When a station is found, the search will stop.
Using the Auto Station
Programme Memory(ASPM)
This function lets you automatically search and
store 50 stations.
1. Press TUNER/ST./MO. on the remote control
or FUNC. on the unit until FM appears in the
display window.
2. Press and hold PTY/ASPM for at least 3 seconds.
After "ASPM" will blink in the display window,
scanning will start. (87.50 - 108.00 MHz)
To stop scanning, press PTY/ASPM again.
3. When an RDS station is found, the station will
be stored in memory.
4. After scanning, the number of stations stored in
memory will be displayed, and then“END” will
appear.
5. Although you preset stations for FM manually,
a preset number for a RDS station will be saved
successively.
6. To listen a stored station, press
/ .
CM2030-DU_AESPLLB_ENG.indd 17 2013-06-19 3:08:57