LG CM2030 - Setting the Clock

Operating18
Operating
3
Deleting all saved RDS
stations
1. Press and hold PROGRAM for two seconds.
“ERASE” will blink in the display window.
2. Press PROGRAM to erase all saved radio
stations.
y
If the same station is broadcast on different
frequencies, the strongest frequency will be
stored in memory.
y
If 50 stations have already been stored in
memory, the scan will be aborted.
y
If no station have been stored in memory,
“0 MEM”and “END” will appear for about 4
seconds.
y
If the RDS signals are very weak, station
may not be stored in memory.
y
If 50 stations is already stored, ASPM will not
work. So delete all these stations to search
and store new RDS stations in memory.
,
Note
Setting the Clock
1. Turn the unit on or off.
2. Press and hold CLOCK for at least 2 seconds.
3. Choose time mode by pressing
C
/
V
.
- 12 HOUR (for an AM and PM display)
or 24 HOUR (for a 24 hour display)
4. Press CLOCK to confirm your selection.
5. Select the hours by pressing
C
/
V
.
6. Press CLOCK.
7. Select the minutes by pressing
C
/
V
.
8. Press CLOCK.
9. If you want to reset the clock, repeat steps 2-8.
CM2030-DU_AESPLLB_ENG.indd 18 2013-06-19  3:08:57
http:\\www.direcTutor.com