1-5
Copyright © 2022 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
CONNECTING THE WIRELESS SUBWOOFER
Connecting the wireless subwoofer
automatically
After completing installation, the wireless subwoofer
will automatically be connected to the sound bar.
Connect the sound bar to the subwoofer in the fol-
lowing order.
1) Plug the power cable into the wireless subwoofer.
2) Plug the power cable connected to the wireless
subwoofer into an outlet.
3) Plug the power cable into the sound bar.
4) Plug the power cable connected to the sound bar
into an outlet.
5) When the connection is automatically established,
you will see the LED on the back of the wireless
subwoofer light up in green.
Checking the connection with the LED on
the back of the wireless subwoofer
You can check the connection status by looking at the
LED on the back of the wireless subwoofer.
LED Color Status
Blinking green
Connecting in progress
Green Connected successfully
Red
Bad connection,
or the subwoofer is in standby
Off Power cable not connected
Connecting the wireless subwoofer
manually
If you see a red LED on the back of the wireless sub-
woofer, it means that the sound bar is not connected
to the subwoofer. If this is the case, connect them in
the following order.
1) Press the Power button on the sound bar to turn
it off.
2) Press the PAIRING button on the back of the
wireless subwoofer. Check if the LED on the back
of the subwoofer is blinking green. If you still see
a red LED on the wireless subwoofer, press and
hold the button on the back of the subwoofer again.
3) Press the Power button on the sound bar to turn
it on.
4) When the connection is established, you will see
the LED light on the back of the wireless subwoofer
light up in green.
Note
• Install the sound bar as close to the wireless
subwoofer as possible. The closer the distance
between the sound bar and the wireless subwoofer,
the better the sound quality.
• Please ensure there are no obstacles between the
sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a
distance of at least 1 m (3.3 ft) between the sound
bar or the wireless subwoofer and any peripheral
devices that generate strong electromagnetic waves
(ex. wireless routers, microwave ovens, etc.).
To Next Page
Loading...
Need help?
General
