EasyManua.ls Logo

LG DVX641 - System Setting; Setup; Progressive Scan; Adjust the Settings

LG DVX641
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 System Setting
System Setting12
System Setting
3
Setup
When the unit is turned-on at the rst time, you
have to select the desired language. (optional)
Adjust the settings
You can change the settings of the player in the
[SETUP] menu.
1. Press SETUP.
2. Select the rst setup option using
ws
and
press
d
to move to the second level.
3. Select a second setup option using
ws
and
press
d
to move to the third level.
4. Select a desired setting using
ws
and press
ENTER to conrm.
5. Press SETUP to escape from setup menu.
[LANGUAGE] Menu
Menu Language/Disc Audio/Disc
Subtitle/Disc Menu
Select and set the language you prefer.
[DISPLAY] Menu
TV Aspect
Select and set TV aspect ratio according to your TV
type and preference.
[4:3]: Standard TV type
[16:9]: Wide TV type
Display Mode
Select and set Display Mode according to your
preference. Display Mode works only when the TV
Aspect mode is 4:3.
[Panscan]: Display full screen with cut non-
main scene on TV
[Letterbox]: Display wide screen with black
stripe at top and bottom on TV
Progressive Scan
Check whether your TV can accept the progressive
signal. If your TV accepts it, you can enjoy accurate
color with high quality by selecting [On].
If there is any error after setting to Progress Scan,
you have to initialize the unit by pressing and
holding STOP for ve seconds.
[AUDIO] Menu
Set the players Audio options according to various
disc output type you use.
Dolby Digital / DTS / MPEG
Select the type of digital audio signal to use the
DIGITAL AUDIO OUT jack.
[Bitstream]: Select to connect DIGITAL AUDIO
OUT jack to an amplier with Dolby Digital, DTS
or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select
to connect DIGITAL AUDIO OUT jack to an
amplier without Dolby Digital or MPEG
decoder.
[O] (for DTS): Select to connect DIGITAL
AUDIO OUT jack to an amplier without DTS
decoder.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48KHz] and [96KHz].
DRC (Dynamic Range Control)
To adjust the volume level by itself when Audio
level reaches to more than the specic level (Dolby
Digital only).
Vocal (DVX640/DVX642 only)
To mix the vocal with music using the multi-
channel karaoke DVD.

Related product manuals