19
EN
Using the Sleep Function
This function turns off the air conditioner
automatically when you go to sleep.
1
Turn the appliance on.
2
Press
TIMER
button repeatedly.
x The icon below blinks at the bottom of the
display screen.
3
Press or button to select the hour (up to
7 hours).
4
Press SET/CANCEL button to finish.
x
is displayed on the display screen.
NOTE
x
is displayed on some indoor units.
x Indoor unit display is displayed from 1H to 7H
which is displayed only 5 seconds and then return
to the setting temperature.
x In the Cooling and Dehumidification Mode, the
temperature increases by 1 °C after 30 minutes
and additional 1 °C after another 30 minutes for a
more comfortable sleep.
x The temperature increases up to 2 °C from the
preset temperature.
x Although the remark for fan speed on the display
screen may be changed, the fan speed is adjusted
automatically.
Using the Light Off Function
Display Screen Brightness
You can set the brightness of the indoor unit display
screen.
x Press LIGHT OFF button.
NOTE
x Turn on/off the Display screen.
Using the Comfort Air
Function
Comfort Vane Operation
This function conveniently sets the vane to a preset
position to deflect the supply air away from blowing
directly onto the occupants in the room.
1
Turn the appliance on.
2
Press COMFORT AIR button repeatedly and
select the desired direction.
x
or is displayed on the display screen.
NOTE
x
or is displayed on some indoor units.
x This function is disabled when you press MODE or
JET MODE button.
x This function is disabled and auto swing of vertical
direction is set up when you press
SWING
button.
x When this function is off, the horizontal vane
operates automatically depending on the set mode.
To Next Page
Loading...
