10
EN
Wireless Remote Control
Inserting Batteries
If the display screen of the remote control begins to
fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
1
Remove the battery cover.
2
Insert the new batteries and make sure that the
+ and - terminals of the batteries are installed
correctly.
Installing the Remote Control Holder
To protect the remote control, install the holder
where there is no direct sunlight.
1
Choose a safe and easily accessible location.
2
Fix the holder by fastening 2 screws firmly with a
screwdriver.
Operating Method
Point the remote control towards the signal receiver
at the right side of the air conditioner to operate it.
NOTE
x The remote control may operate other electronic
devices if it is directed towards them. Make sure to
point the remote control towards the air conditioner
signal receiver.
x For proper operation, use a soft cloth to clean the
signal transmitter and receiver.
x In case of a function not provided in the product,
no buzzer sound occurs from the product when a
button for such function on the remote control is
pressed except for Air Flow Direction (
SWING
), Air
Purification function (
).
To Next Page
Loading...
