21
EN
Using Special Functions
1
Turn the appliance on.
2
Press FUNC button repeatedly to select the
desired function.
3
Press SET/CANCEL button to finish.
Display
Screen
Description
The Ion generator uses millions of
ions to help improve indoor air
quality. (P.21)
To reduce noise from outdoor units.
(P.22)
To maintain a minimum room
temperature and prevent objects in
the room from freezing. (P.22)
To remove moisture generated
inside the indoor unit. (P.22)
NOTE
x Some functions may not be supported, depending
on the model.
x Some functions may operate differently from the
remote control display.
Canceling Special Functions
1
Press FUNC button repeatedly to select the
desired function.
2
Press SET/CANCEL button to cancel the
function.
Using the Air Purification Function
These functions supply clean and fresh air by ion
particles and the filter.
Function Display Description
Ionizer
Ion particles from
Ionizer sterilize the
aerial bacteria and
other harmful
substances.
Plasma
It removes
microscopic
contaminants from
the intake air
completely to
supply clean and
fresh air.
NOTE
x You can use this function without turning the air
conditioner on.
x Both the plasma lamp and the cooling lamp light
up while Smoke Away/Plasma is in operation on
some models.
x Do not touch ionizer during operation.
x This function may operate differently from the
remote control display.
To Next Page
Loading...
