22
■ Control panel
How to use washer
Start/Pause Button LED display
SmartDiagnosis™ function is
available only for the products with
a SmartDiagnosis™ mark.
Power Button
Program Button Options
Power
• Touch and release your fingers to turn it
on.
• Touch and release your fingers after 1
second to turn it off.
Program button
• Programs are available according to the
laundry type.
• Lamp will light up to indicate selected
program.
LED display
• The display shows the settings, estimated
time remaining, options, and status
messages for your washer.
The display will remain on through the
cycle.
Start/Pause
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is
needed, touch the Start/Pause button.
• When in Pause, the power is turned off
automatically after 4 minutes.
Options
• This allows you to select an additional
cycle and will light when selected.
• Use these buttons to select the desired
cycle options for the selected cycle.
To Next Page
Loading...
