- 15 -
11) Display color 15,0 box full white pattern at mode 6.
12) DRIVE ADJ command.
13)Set B-DRIVE to 97 at DRIVE of the alignment
program.
14)Adjust R-DRIVE and G-DRIVE command to white
balance x=0.283 ± 0.003 and y=0.298 ± 0.003 on
the White Balance Meter with PC arrow keys.
15) Display color 15,0 box pattern(70x70mm) at Mode 6.
16)Adjust SUB-CONTRAST command to 40±1FL of
the raster luminance.
17) Display color 15,0 full white pattern at Mode 6.
18) COLOR ADJ. → LUMINANCE → ABL command.
19) Adjust ABL to 30 ± 1FL of the luminance.
20) Exit from the program.
6. Adjustment for Focus.
1)
Display H character in full screen at Mode 6.
2)
Adjust two Focus control on the FBT that focus
should be the best condition.
To Next Page
Loading...
Need help?
General
