LG Flatron W1946S

- 8 -
Change your lock on the product as it follows and turn
it in the arrow direction. (#1~2)
# 1
# 4
# 2
# 3
1. Pull the front cover upward.
2. Then, let the all latches are separated.
3. Put the front face down.
# 5
Disassemble back cover.
Copyright 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
DISASSEMBLY-Set
..
Good Position
Bad Position
If you can't release the stand base even the locking knob is at a release
position, Please push the indicated knob down and retry it.
Pushing the PUSH button, Take the stand body from hinge body.