LG GP3 - Page 15

15
Note
• XX are the last two digits of the Bluetooth address. An example would be “LG-GP3 (08)”.
• The closer the Bluetooth device is to the speaker, the better connection you will get.
• If no Bluetooth device is connected to the speaker, the function LED blinks in blue. Connect the device again.
• Adjust the volume of the Bluetooth device to an appropriate level when using it.
• Once the connection was established between the product and the Bluetooth device, you only need to select
Bluetooth mode by pressing the Function
button of the speaker while the Bluetooth device's Bluetooth
function is turned on.