LG GP3 - Charge; Charging the Battery

8
Charge
Charging the Battery
Thespeakerisabuilt-inbattery.Makesuretochargethebatterysufcientlybeforeuse.
a Open the back cover and connect the USB cable to
DC IN 5 V 0 2 A port of the speaker.
b Connect the supplied USB cable to the AC adapter.
c Plug the AC power cord into an AC outlet.
a
b
a
b
Note
• It takes about 3.5 hours to fully charge the speaker. The charging time may differ depending on the battery
status or the speaker operation status.
• Once the battery is fully charged, you can use the speaker for about 6 hours.
- This is based on a continuous use with the volume level at 50% and the logo light and sound effects off. It
may vary depending on the battery or the operation status.
> CAUTION
AC adapter is not supplied. It is recommended that you use the 5 V AC adapter approved by LG Electronics Inc.
(more than 2 A) with this speaker because of danger of explosion. If you do not use the recommended adapter,
charging is unavailable or charging time may differ.
Charge