LG GP3 - Using Voice command

18
Using Voice command
You can turn on the Google Assistant or Siri function on your smartphone and use voice command through the
speaker’s microphone.
Please check the following rst.
• Use a smart device that provides a voice command function.
• This function may not work depending on the Bluetooth device.
a Connect the smartphone to the speaker via Bluetooth. ([ See “Connecting to Bluetooth” on page 13.)
b Press the Microphone
button. When voice command is enabled, the microphone LED turns green.
c Say a desired voice command for Google Assistant or Siri close to the speaker’s microphone.
Note
• While the hands-free function is being used, this function is disabled.
• If the voice command time limit is exceeded on the smartphone, the function is disabled automatically.
• Android devices may not support this function in some countries according to Google policies.
• If voice command does not work, check the smartphone.