LG GP3 - Back

7
Back
a b c
d
a
RESET
When the speaker does not function properly, use a sharp object such as a pin
to press the hole.
b
DC IN 5 V 0 2 A
Plug in a USB (C-Type) cable to connect the speaker to the PC.
Or connect an AC adapter to charge the speaker.
c
Plug in the headset or earphones wire to connect it to the speaker.
• The microphone on the headset can only be used for voice chat in the USB
mode.
d
Back Cover Make sure to fully close the back cover after use.
> CAUTION
Use caution when handling the speaker. The speaker on the rear is exposed. Avoid making contact with the
exposed speaker.