LG GP3 - Page 31

31
The device does
not operate
normally.
• Battery discharge may cause the Bluetooth information to be deleted. If the
speaker’s power supply is blocked, previous settings may not be saved.
• Use this product in a place where the temperature and humidity are not too high or
low. If the problem continues, contact LG Electronics’ Customer Service Center.
• FPS and EQ LEDs blink when the speaker malfunctions due to an abnormality. Turn
the speaker off and on again.
• If a problem occurs while charging the battery, the power LED alternates between red
and orange and charging stops. Unplug the adapter from the outlet.
The above
solutions do not
work.
• Use a sharp object such as a pin to push the RESET
button. ([ See “Resetting
the Speaker ” on page 25.)