3. Installation Space
3 _ Air-to-Water Heat Pump
Part 2. Desing and installation
3.1 General considerations
• If a sunroof is built over the unit to prevent direct sunlight
or rain exposure, make sure that heat radiation from the
heat exchanger is not restricted.
• Ensure that the spaces indicated by arrows around front,
back and side of the unit.
• Do not place animals and plants in the path of the warm
air.
• Take the weight of the unit into account and select a place
where noise and vibration are minimum.
• Select a place so that the warm air and noise from the unit
do not disturb neighbors.
• The surface of the ground or the structure must be strong
enough to bear the weight of the unit.
To Next Page
Loading...
Need help?
General