1-7
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
PROGRAM DOWNLOAD GUIDE
caution) Do not perform any other work such as disconnecting USB device, switching to the Function and turning
off the power while downloading it to the set.
The USB device should be disconnected after completing the download.
• AUDIO USB DOWNLOAD GUIDE
1. When the USB device is inserted on the USB function, is displayed on the screen after a while.
“File : HT963_yymmddx.hex” * x: version.
2. The message “Upgrade” is displayed while downloading.
3. The power is automatically turned off when downloading is completed.
• DVD USB DOWNLOAD GUIDE
The program file to download should be named as BANK.ROM.
- The downloaded file should be modified as BANK30.ROM.
- After safely storing BANK30.ROM at the USB device, perform the following
steps.
1. When the USB device is inserted at the USB function, the screen is changed into downloading
screen.
2. When downloading is completed, the message “Completed” is displayed at the top left on the screen.
3. Turn on the power, press the SETUP button of the remote control on the USB FUCTION. When the
SETUP window is displayed on the screen, move down once to select the DISPLAY menu. Go to the
TV Aspect on the right menu, move to “16:9”, enter “1397139” by using the numeric key of the
remote control, and press the ENTER key.
Then, the System Information screen is displayed. If not, retry the steps at the above.
4. When Step 3 is completed, press the Pause key of the remote control.
5. Disconnect the power cord, and reconnect it after 5 seconds to complete downloading.
6. When the power is turned on, the language selection menu is initially displayed.
After selecting the desired language, press the SELECT/ENTER.
To Next Page
Loading...
Need help?
General
