31
ENGENGLISH
WATCHING TV
WATCHING TV
Connecting to an antenna
Connect an antenna to watch TV referring to the
following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connecting an antenna
y
Use a signal splitter to use more than 2
TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y
If the image quality is poor with an
antenna connected, aim the antenna to
the proper direction.
y
An antenna cable and converter are not
supplied.
NOTE
Wall Antenna
Socket
Connecting with a satellite dish
(Only Satellite models)
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 ohm).
13/18V
700mA Max
LNB IN
Satellite
Satellite Dish
Connect the TV to a wall antenna socket with a
RF cable (75 ohm).
To Next Page
Loading...
