42
ENG
ENGLISH
WATCHING TV
The connected input sources display in black
and the disconnected input sources in grey.
- To add an input label, press the Green button.
You can easily identify a device connected to
each input source.
- If you connect a new external device to the
TV, a pop-up window appears. Select Yes on
the pop-up window to select an input source.
- To access the SIMPLINK, press the Red
button. If you select “SIMPLINK and On”, the
pop-up window for the HDMI input will not
display.
Using the input list
Selecting an input source
1 Press INPUT to access the input sources.
- The connected device displays on each input
source.
2
Press the Navigation buttons to scroll to one of
the input sources and press
OK
.
Input source Description
Antenna or
Satellite
Watch TV over the air and digital cable
broadcast.
USB Use the movie, photo or music file.
NETWORK Use it for DLNA.
AV Watch the contents in a VCR or other
external devices.
Component Watch the contents in a DVD or other
external devices, or through a digital
set-top box.
RGB View a PC display on the screen.
HDMI Watch contents in a HTS or other high
definition devices.
Antenna USB 1
Input List
Input Label
Exit
AV1
NETWORK
AV2
Component1
▼
▼
SIMPLINK
Page 1/2
HDMI2 HDMI3HDMI1
Component2
RGB
USB 2
y
Image shown may differ from your TV.
y You can also access the input source list
by selecting INPUT in the Home menus.
NOTE
To Next Page
Loading...
