92
ENG
ENGLISH
CUSTOMIZING SETTINGS
PICTURE
OK
Move
Exit
● Aspect Ratio : 16:9
● Set 3D Video
● Picture Wizard
●
Energy Saving : Off
● Picture Mode : Standard
● Backlight 70
● Contrast 100
● Brightness 50
● Sharpness 70
● Colour 60
● Tint 0
● Colour Temp. 0
● Advanced Control
● Picture Resest
● TruMotion : Low
● Screen
● LED Local Dimming: Low
PICTURE settings
1 Press HOME to access the Home menu.
2 Press the Navigation buttons to scroll to SETUP and press
OK.
3 Press the Navigation buttons to scroll to PICTURE and press
OK.
4 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
- To return to the previous level, press BACK.
5 When you are finished, press EXIT.
R G
W C
The available picture settings are described in the following.
Setting Description
Aspect Ratio Changes the image size to view images at its optimal size (See p.40).
Picture Wizard
(Only LED LCD TV
/ LCD TV)
Adjusts the image quality and calibrates the screen by following the on-screen instructions.
The customized options will be saved as Expert1 in the Picture Mode.
Standard
Mode to set standard picture quality.
(
Black Level, White Level, Tint, Colour, Horizontal Sharpness, Vertical
Sharpness, Backlight(Only LCD TV/LED LCD TV))
Preferred
Mode to set user preferred picture quality rather than standard picture.
(
Black Level, White Level, Tint, Colour, Sharpness, Dynamic Contrast,
Colour Temperature, Backlight(Only LCD TV/LED LCD TV))
Set 3D Video
(Only 3D models)
Sets the 3D imaging option. (See p. 86)
y If you stop the setting before the final stage, the changes will not be applied.
y If you use Picture Wizard, the Energy saving feature will turn off automatically.
y To reset changes made by Picture Wizard, operate Picture Reset when Picture Mode is
on Expert1.
y In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness
values are not applied.
NOTE
y
Image shown may differ from your TV.
To Next Page
Loading...
