LG LCD TV / LED LCD TV / PLASMA TV - Managing TV Programmes

34
ENG
ENGLISH
WATCHING TV
Managing programmes
Automatically setting up pro-
gramme
Use this to automatically find and store all avail-
able programmes.
When you start auto programming, all previously
stored service information will be deleted.
1 Press HOME to access the Home menus.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
Auto Tuning and press OK.
5 Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
y If the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
y If you wish to keep on auto tuning select
Start using the Navigation buttons. Then,
press the OK button. Otherwise select
Close.
y Automatic Numbering: Decide whether
to use the programme numbers as sent by
broadcasting stations for tuning. (Only DTV)
Selecting Antenna,
1 Press HOME to access the Home menus.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to
Satellite and press OK.
6 Press the Navigation buttons to scroll to
Satellite DTV Setting and press OK.
7 Press the Navigation buttons or Number but-
tons to scroll make appropriate adjustments
and press OK.
8 Press the Navigation buttons to scroll to
Close and press OK.
9 Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
10 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Selecting Satellite,
(Only Satellite models)
NOTE
y Programme Type : You can select All
Programmes, FTA Programme or Paid
Programme.
y Network Search : You can search through
both an existing Transponder List and the
Transponder List that was transmitted via
NIT.
y You can change the Setting ID Info from the
Setting menu.
y You can Add/Delete the Setting ID from the
Satellite DTV Setting menu.