LG LCD TV / LED LCD TV / PLASMA TV - Manually Setting up Programme (in Analogue Mode)

36
ENG
ENGLISH
WATCHING TV
1 Press HOME to access the Home menus.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to Satel-
lite DTV and press OK.
6 Make appropriate adjustments.
7 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Selecting Satellite,
(Only Satellite models)
NOTE
y If the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
y Transponder : If there is no transponder to
use, you can add a transponder by logging in
as User.
y If there is no transponder, you cannot use
Auto Tuning. In this case, you must add a
transponder using Manual Tuning.
Manually setting up programme
(In analogue mode)
Manual Tuning lets you manually tune and arrange
the stations in whatever order you desire.
NOTE
y Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
y BG : PAL B/G (New Zealand / South Africa
/ Singapore / Indonesia / Israel / Malaysia /
Vietnam / Asia)
DK : PAL D/K (New Zealand / South Africa /
Singapore / Indonesia / Israel / Malaysia /
Vietnam / Asia)
I : PAL I/II (New Zealand / South Africa /
Singapore / Indonesia / Israel / Malaysia /
Vietnam / Asia)
B/B : Australia
M : NTSC-M (South Africa / Indonesia /
Israel / Malaysia / Vietnam / Asia)
y To store another channel, repeat steps 5 to
10.
1 Press HOME to access the Home menus.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to
TV and press OK. (Only DTV)
6 Scroll through the programme types, and then
add or delete programmes.
7 Press the Navigation buttons to scroll to
TV System. (Except for Australia)
8 Press the Navigation buttons to scroll to
V/UHF or Cable.
9 Press the Navigation buttons or Number but-
tons to scroll to the desired channel number.
10 Press the Navigation buttons to scroll to
commence searching.
11 Press the Navigation buttons to scroll to
Store and press OK.
12 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.