LG LCD TV / LED LCD TV / PLASMA TV - Satellite DTV Setting; Manually Setting up Programme

35
ENGENGLISH
WATCHING TV
Satellite DTV Setting
You can add or delete a satellite setting ID.
1 Press HOME to access the Home menus.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to Satel-
lite DTV Setting and press OK.
5 Select your desired Source.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
(Only Satellite models)
NOTE
y If you set LNB Frequency to User or Satel-
lite to Others when adding a setting ID,
you can add a transponder during Manual
Tuning.
y You can add up to 16 setting IDs.
y All setting IDs can be deleted, except for
Setting ID 1.
y When selecting 22KHz Tone and DiSEqc, or
Tone Burst and DiSEqc, you must connect
them in the same position as displayed on
the OSD.
y If a motor is connected, 22KHz Tone, Tone
Burst and DiSEqc are disabled on the TV
OSD.
1 Press HOME to access the Home menus.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
Manual Tuning and press OK.
5 Press the Navigation buttons to scroll to DTV
and press OK.
6 Scroll through the programme types, and then
add or delete programmes.
7 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Manually setting up programme
(In digital mode)
Manual Tuning lets you manually add a pro-
gramme to your programme list.
Selecting Antenna,
NOTE
y If the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
(Only DTV)