LG LCD TV / LED LCD TV / PLASMA TV - When a Security Code Is Already Set

47
ENGENGLISH
ENTERTAINMENT
When a security code is already
set
PIN (Personal Identification Number)
If you want to connect the AP (Access Point) or
router with PIN, use this feature.
1 Repeat step 1-7 on “Connecting the wireless
network”.
2 Press the Red button to connect the access
point with PIN mode.
3 You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
PIN number is the unique 8 digit number of the
dongle.
4 Press OK to select Connect.
WPS (Wi-Fi Protected Setup)
If your access point or wireless router that sup-
ports PIN or WPS(Wi-Fi Protected Setup), it’s
available to use your access point or wireless
router within 120 counts. You do not need to know
the access point name (SSID: Service Set Identi-
fier) and security code of your access point or
wireless router.
1 Repeat step 1-7 on “Connecting the wireless
network”.
2 Press the Navigation buttons to select the
Simple setting (WPS-button mode).
3 Press OK to select Connect.
4 Repeat step 6-7 on “Connecting the wired
network”.
Connecting with PIN mode
Insert PIN number at the AP webpage and
press [Connect] button.
PIN NUBMER : 12345670
Connect
󰮺Previous
For more information, check the AP manual.
󰯠 Exit
󰭺Next
5 Repeat step 6-7 on “Connecting the wired
network”.