48
ENG
ENGLISH
ENTERTAINMENT
Ad-hoc Mode
This is the method of communicating directly with
the machine to communicate without AP.
This is the same as connecting two PCs with a
cross cable.
1 Repeat step 1-5 on “Connecting the wireless
network”.
2 Press the Navigation buttons to select Setting
Ad-hoc network and press OK.
3 Press the Navigation buttons to select OK and
press OK.
4 Press OK to select Connect to connect Ad-hoc
network.
- You can see the Network ID and Security Key
on your TV screen.
- Enter this Network ID and Security Key to
your device.
- If a network may not operate, change the set-
ting information using the Red button.
NOTE
Example of the PC setting that supports a
wireless network
y Find a wireless network device in your
PC.
y Select LGTV10 that appears in the list.
(Select the same name as the network ID
that appears on your TV screen.)
y Type 1111111111 in the Inserting the se-
curity key dialog. (Type the security key
that appears on your TV screen.)
5 Press the Navigation buttons to insert the IP
address and press OK.
Option Description
PC Setting
y Internet Protocol(TCP/IP) of PC
needs to be set manually.
y IP address, Subnet Mask, and
default Gateway can be set with
your own discretion.
y i.e) IP address: 192.168.0.1 / Sub-
net Mask: 255.255.255.0 / default
Gateway: 192.168.0.10
TV Setting
y Verify IP address and gateway of
PC.
y Input Gateway address of PC to
IP Address, and IP Address of PC
to Gateway, and select OK.
y i.e) IP address: 192.168.0.10 /
Subnet Mask: 255.255.255.0 /
default Gateway: 192.168.0.1
6 Press the Navigation buttons to select Close
after Network setting is completed.
7 Press the OK.
To Next Page
Loading...
