97
ENGENGLISH
CUSTOMIZING SETTINGS
Advanced image options (Depending on model)
Setting Description
Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker.
Dynamic Colour Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue and green white look more vivid.
Clear White Make the white area of screen brighter and more white.
Skin Colour It detects the skin area of video and adjusts it to express a natural skin colour.
Noise Reduction Reduces screen noise without compromising video quality.
Digital Noise Reduc-
tion
Reduces noise regarding MPEG compressed video.
Super Resolution This function provides a crystal-clear picture by improving the details in an area that has a
blurry or unclear picture.
MPEG Noise Reduc-
tion
Reduces noise regarding MPEG compressed video.
Gamma You can adjust brightness of dark area and middle gray level area of the picture.
»
Low: Make the dark and middle gray level areas brighter.
»
Medium: Express the original picture level.
»
High: Make the dark and middle gray level area darker.
Black Level
Sets black level of the screen to proper level. This function is available in the following
modes: AV (NTSC-M), HDMI or Component.
»
Low: The reflection of the screen gets darker.
»
High: The reflection of the screen gets brighter.
Eye Care Adjusts the brightness of the screen to prevent the screen from being too bright. Dims ex-
tremely bright pictures.
This feature is disable in “Picture Mode-Vivid, Cinema, Expert1, Expert2, Intelligent Sensor”.
Film Mode or Real
Cinema
Makes video clips recorded in film look more natural by eliminating judder effect.
Uses this function when you watch film-originated movie contents.
This function can also work when TruMotion is off.
Colour Gamut Advanced Control
Maximizess the utilization of colour to increase colour quality.
»
Standard: Displays standard set of colours.
»
Wide: Increase number of colours used.
Expert Control
Displays colour domain of the signal.
»
Standard: Displays standard set of colours.
»
Wide: Increase number of colours used.
»
EBU: Mode to display EBU standard colour area.
»
SMPTE: Mode to display SMPTE standard colour area.
»
BT709: Mode to display BT709 standard colour area.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
xvYCC This is produces richer colours.
This feature represents rich colours as much as a conventional video signal.
This function is enabled in “Picture mode - Cinema, Expert” when xvYCC signal is inputted
through HDMI.
Colour Filter This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment
This function is enabled in “Picture Mode - Expert” when you watch DTV.
To Next Page
Loading...
