Section 2F: Using Contacts 103
3. Highlight the part of the entry you wish to edit (Name,
Group, Ringer, etc.) and press .
4. Add or edit the desired information and press .
5. Press Save (left softkey) to save your changes.
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer Types”on
page 49.)
To select a ringer type for an entry:
1. Display a Contact entry.
2. Scroll to <Edit Entry> and press .
3. Highlight the current ringer type ( ) and press to
display the Ringer Type menu.
4. Select a ringer type and press .
5. Use your navigation key to scroll through available
ringers. (When you highlight a ringer type, a sample
ringer will sound.)
6. Highlight a ringer and press .
7. Press Save (left softkey) to save the new ringer type.
Contacts
To Next Page
Loading...
