Section 2J: Using the Built-in Camera 133
1. From camera mode, press the navigation key up or
down, or the side volume key up or down to adjust the
zoom. (The gauge bar is displayed.)
2. Press Capture (left softkey), , or the side camera
button to take the picture. (The picture will
automatically be saved in your selected storage area.)
Note: The Zoom gauge will not be displayed when the Resolution setting
is 1.3M (960*1280).
Selecting Camera Settings
1. From camera mode, press Options > Settings.
2. Select an option and press :
Resolution to select a picture’s file size [1.3M
(960*1280), VGA (480*640), orQVGA (240*320)].
Quality to select the picture quality setting (Fine ,
Normal, or Economy).
Shutter Sound to select a shutter sound (Shutter
1
~
4, or Off).
Image Enhancer to enhance image resolution (On or
Off).
Status Bar to select a status bar (Onor Off).
Built-in Camera
To Next Page
Loading...
