Section 2A: Your Phone: The Basics 29
2-sec pause allows you to enter a two-second pause.
(See “Dialing and Saving Phone Numbers With Pauses”
on page 36.)
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call.(Depending on
your phone’s settings, you may also answer incoming
calls by pressing any number key. See “Call Answer
Mode”on page 67 for more information.)
Your phone notifies you of incoming calls in the following
ways:
The phone rings or vibrates.
The indicator light flashes. (2 indicator lights is located
on the right side of LCD.)
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts,
the entry’s name is displayed. The caller’s phone number
may also be displayed, if available.
Phone Basics
To Next Page
Loading...
